在我國的多個場所，通風管道的使用是很為普及的，它們是進行空氣流通，幫助空調完成作業的主要零部件。也正是因為如此，我們在安裝空調的時候，都會進行通風管道加工，只有這樣，才能夠讓通風管道與空調相結合。不過在通風管道的加工之前，需要注意規格和類型

In many places in China, the use of ventilation ducts is very popular. They are the main parts for air circulation and help air conditioners complete their operations. It is precisely because of this that we will process the ventilation duct when installing the air conditioner. Only in this way can we combine the ventilation duct with the air conditioner. However, before processing the ventilation duct, it is necessary to pay attention to the specification and type

規格。

Specifications.

這里所說的規格，就是通風管道的基本規格，我們所需要的通風管道的尺寸和大小。值得我們注意的是，在進行規格確定的時候，我們需要與空調的使用進行聯系，只有這樣，我們才能夠保證通風管道規格設定之后，能夠與空調相互連接，并發揮使用功能，完成它們的使用效果。

The specifications mentioned here are the basic specifications of the ventilation duct, and the size and size of the ventilation duct we need. It is worth noting that when determining the specifications, we need to contact with the use of the air conditioner. Only in this way can we ensure that after the ventilation duct specifications are set, it can be connected with the air conditioner, give play to the use function and complete their use effect.

類型。

Type.

通風管道的類型有很多種，不同的類型與空調進行聯合使用，所發揮出來的效果也不一樣，尤其是保溫性的通風管道。所以說，我們要想進行通風管道加工，且讓它們更好的結合空調進行工作，那么，我們也要在加工之前考慮下它們的類型，這是我們確保它們作業，發揮優勢作用的好條件。

There are many types of ventilation ducts. Different types of ventilation ducts combined with air conditioners have different effects, especially thermal insulation ventilation ducts. Therefore, if we want to process ventilation ducts and make them work better in combination with air conditioners, we should also consider their types before processing, which is a good condition for us to ensure their efficient operation and give full play to their advantages.

濟南通風管道加工人員認為其他的注意事項也不能大意，比如說：在通風管道的加工過程中，應盡量避免出現縱縫，但不應出現橫縫。此外，通風管道的底切和拐角需要根據設計清潔度要求用密封膠密封。另外，排氣管接頭的密封面應設置在排氣管壁的正壓側。

Jinan ventilation pipe processing personnel believe that other precautions should not be careless. For example, during the processing of ventilation pipes, longitudinal joints should be avoided as far as possible, but transverse joints should not occur. In addition, the undercut and corner of the ventilation duct shall be sealed with sealant according to the design cleanliness requirements. In addition, the sealing surface of the exhaust pipe joint shall be set at the positive pressure side of the exhaust pipe wall.

在通風管道加工過程中，不能在風管上設置加強框或加強筋，因為這樣會對通風管道的質量產生一定的影響。通風管道加工不能采用“S”型切割和“C”型直角切割的連接方式。此外，一些特殊的通風管道不能堵塞。通風管道加工完成后，用清洗液清洗。只有達到清潔標準后，才能及時封存。

In the process of ventilation duct processing, reinforcing frames or ribs cannot be set on the air duct, because this will have a certain impact on the quality of the ventilation duct. "S" type cutting and "C" type right angle cutting shall not be adopted for ventilation duct processing. In addition, some special ventilation ducts shall not be blocked. After the ventilation pipe is processed, clean it with cleaning solution. Only after the cleaning standard is met can it be sealed in time.

綜上情況來說，通風管道加工前，要與空調的基本情況相結合，并要注意通風管道的規格和類型，不同的空調需要不同的通風管道，規格不同，類型也不相同。所以在加工通風管道的時候，需要多考慮以上情況。更多相關內容就來我們網站m.jzfckj.net看看吧！

To sum up, before processing the ventilation duct, it should be combined with the basic conditions of the air conditioner, and pay attention to the specification and type of the ventilation duct. Different air conditioners need different ventilation ducts, with different specifications and types. Therefore, the above situations should be taken into account when processing ventilation ducts. For more information, please visit our website at www.jnqsg Take a look. Www. 68mn!